Pagina 1 di 1
League of Legends : Freljord Patch
Inviato: 30 aprile 2013, 18:17
da WaZu
Finalmente si, oggi per tutti i giocatori di League of Legends ( LoL ) è disponibile la tanto attesa Patch 3.6 o meglio nominata Freljord Patch, viste le molteplici aggiunte riguardanti tutte la regione di Freljord. Le feature di questa patch sono molte e coprono molti aspetti del gioco.
Ma andiamo a seguire le principali:
-un rework grafico e di gameplay di Sejuani e Trundle.
-Aggiunta della nuova mappa Howling Abyss, mappa a sfondo gelido pensata per l'ARAM, ora in modalità PvP a sé stante e non più relegata alle partite custom come la sua vecchia versione "Proving Grounds".
-Un nuovo splash art per Nunu e nuove Skin per alcuni champion
-Implementazione dei files di Lissandra, il nuovo champion (Non implementato con questa patch) e molto altro ancora.
Per saperne di più potete andare sul sito ufficiale direttamente da
Qui
Re: League of Legends : Freljord Patch
Inviato: 29 novembre 2024, 8:33
da sugarygod
La Patch 3.6 di League of Legends, nota come Freljord Patch, è finalmente disponibile. Ecco le principali novità:
Rework grafico e gameplay per Sejuani e Trundle.
Nuova mappa Howling Abyss, dedicata all'ARAM, ora modalità PvP autonoma.
Nuovo splash art per Nunu e nuove skin per alcuni campioni.
File di Lissandra aggiunti in preparazione al suo arrivo.
Re: League of Legends : Freljord Patch
Inviato: 27 giugno 2026, 9:41
da ElizaBing
I’ve noticed the same kind of behaviour on a few small wheeled robot kits before. From what I understand, it’s usually not really a “fault”, but more like a PWM threshold issue — at lower speed values the motors just don’t get enough torque to overcome friction, so they kind of hum or “screech” instead of turning smoothly.
winorama casino
It might also depend a lot on wheel friction and load. Have you tried testing the motors with the wheels off (or lifted) to see if they behave smoothly at low speed? That could help figure out if it’s mechanical resistance or more of a controller limitation.
Also wondering — did anyone manage to tune the PWM settings or motor driver parameters on the ADR014 to make low-speed control smoother, or is it just a hardware limitation of the kit?